norman@detekmachine.com

Gas retention capacity of secondary sealant in IGU production

Gas retention capacity of secondary sealant in IGU production -by DETEK machine A wide variety of sealants are used to seal insulating glass units and the most important performance features of a sealant are the following: (a) Compatibility with glass, spacer, desiccant and glazing materials. (b) Low water vapour transmittance. (c) Good adhesion. (d) Resistance to service …

Gas retention capacity of secondary sealant in IGU production Read More »

Secondary sealant sealing depth in Insulating glass.

As to the insulating glass secondary sealant Sealing depth, there is standard that requires: Single sealant thickness(sealing depth) is 10mm±2mm. Double sealant thickness(sealing depth) is 5mm~7mm Super spacer thickness(sealing depth) is 8mm±2.0mm  from China National insulating glass standard GB/T  11944-2002.  Of course, the real actual production will be different as per the aluminum frame mounting position. …

Secondary sealant sealing depth in Insulating glass. Read More »

The role of molecular sieve in insulating glass

The role of molecular sieve in insulating glass What is the ingredient of desiccant? 3A insulating glass (IG) desiccant is made from molecular sieve 3A. This IG desiccant can deeply co-adsorb resident moisture and organics in insulating glass, keep the IG clear and transparent even at very low outside temperature, prevent the condense of inside …

The role of molecular sieve in insulating glass Read More »

How many methods or possible ways to fill gas into insulating glass unit?

No matter the demand of energy saving or sound proof, more and more insulating glass orders are requesting to have gas filled, so how to fill Argon into insulating glass air gap? Usually there are two possible ways, automatic with IGU line online, or manual gas filling with tools. 1. Automatic gas filling.   The gas …

How many methods or possible ways to fill gas into insulating glass unit? Read More »

LiSEC USA to takeover Sales and Service of Schraml machines in North America

LiSEC USA to become market distributor for Schraml (a LiSEC Company) effective July 1st, 2018. LiSEC America shall be responsible for sales, installation and aftermarket service for future and existing Schraml glass processing machines in North America. Up until now, Schraml glass processing machines have been exclusively sold and serviced in the USA by Machines …

LiSEC USA to takeover Sales and Service of Schraml machines in North America Read More »

Why should remove the coating surface where the butyl contact glass?

Butyl sealant is the preferred adhesive to seal between spacer bar and glass, known as the primary sealant, which has very good water and gas holding capacity.  The adhesion between butyl and low-e coating does not perform well. Consequently, it is required to remove the low-e coating around the edges of the glass. This process …

Why should remove the coating surface where the butyl contact glass? Read More »

Why should we remove the low-E glass coating in IGU production?

More and more people are familiar with insulating glass, and also know better about Low-E glass. The glass processing companies are always talking about Low-E glass tempering furnace, or Low-E glass insulating glass washing machine. However, do you know why should we remove the low-E glass coating in IGU?  Or which side should be inside …

Why should we remove the low-E glass coating in IGU production? Read More »

7 tips for your insulating glass business Start Up.

How to start a new insulating glass production business? How to start a new insulating glass processing business?  It maybe very complicated, and seems too many things to do. However, it is not so difficulty after your reading and follow the steps and suggestions below. What is insulating glass? Let’s see what Wikipedia says below? Insulating …

7 tips for your insulating glass business Start Up. Read More »

Scroll to Top
small_c_popup.png

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@detekmachine.com”